Well, as its a little warmer now than it was this morning I decided to go back down to the shop and finish the veggie and dip bowl.
Lets look at the photos:
Ive been looking at the bowl for several days and I decided it would look better and hold more food if it were hollowed out a little more so thats what I did. I deepened it by 3/4" and I also beveled the rims This photo shows it mounted on the lathe before hollowing:
The next three photos show the bowl after it was hollowed out more and sanded. I sanded to 320 grit and polished it with pine shavings. This photo shows the end grain on the side of the bowl:
This is a photo of it looking down on it:
And this is it from the side:
Here are photos of the bowl with a coat of General Finishes salad bowl varnish:
As its too cold for the varnish to dry today, Ill take it inside and let it dry over night and tomorrow and for the next several days Ill give it a very thin coat of varnish. Afterwards Ill polish it. Look for the final finish photos on Sunday.VW
About later
Author Description here.. Nulla sagittis convallis. Curabitur consequat. Quisque metus enim, venenatis fermentum, mollis in, porta et, nibh. Duis vulputate elit in elit. Mauris dictum libero id justo.
